PP/HPS SHEET EXTRUDER-MONO/CO-EXTRUDER
HIGH
PERFORMANCE SCREW AND BARREL
The
screw is manufactured from SACMI alloy steel, tungsten carbide treated for
maximum wear resistance.
Specially designed screw assures superior mixing and extruding capacity. The barrel is manufactured from SACMI alloy steel, nitrided for maximum wear resistance.
HYDRAULIC
SCREEN CHANGER OR AUTO-SCREEN CHANGER
The extruder employs a hydraulic screen changer, providing maximum convenience
for screen change
EXTRUDER
There are five heating zones on the extruder. The extruder is driven by a
powerful DC motor.
SPECIFIACTIONS:
Applicable material: PP,
HPS
Sheet thickness range:
0.35 ~ 1.5mm
Sheet width: Max. 600
~ 800mm
Extruding capacity: 150-2500
kgs /hr (PP)
200-300 kgs /hr (HPS)
EXTRUDER (TWO EXTRUDER TYPE)
Screw
diameter:
Ø100mm (main extruder)
(L/D ratio 34:1)
Ø 60 mm (on second
extruder) (L/D ration 34:1)
Screws are manufactured
from SACM alloy steel, nitride treated.
Barrel:
Manufactured from SACM alloy steel, inside wall is nitrified and precision grinding.
Gearbox:
forced lubrication with cooling device, high loading, low
noise. FLENDER,
Motor:
125 HP, 50 HP, DC motor
Screen
changer: hydraulically operated or auto-screen changer
Cooling
system: Air cooling
Hopper:
200 kgs
Control
box: 21 point, SCR temperature control
Heat capacity: 70 KW
EXTRUDER
DIE
Two
layer T-die: Coat hanger type, single/double flow channels, thickness adjustment
on individual layer.
T-die width: 1000mm
COOLING TAKE-OFF
ROLLER
Cooling
calendar: 45°slant alignment, 3 pcs
of dia. *350mm
All rollers are precision ground to mirror effect, hardened and polished.
Roller width 1000mm, separate temperature control
on cooling device.
Operation method: hydraulic
Motor:
2
Equipped
with air knife system
EDGE TRIM, COATING, TAKE-UP WINDER
TRIM UNIT: Includes one set edge trim knife and collection
crushing conveyor and pressing device.
COATING UNIT:
3 pcs of rubber roller with 165mm
dia. x1000mm length. Pump circulation system.
Motor: 2
STATIC ELECTRICITY TREATMENT: One set electrostatic remover.
TAKE-UP WINDER
TYPE: Turret type, double shaft change, center winding.
TURRET MECHANISM: Auto/manual web change with alternative running. 1 HP speed reducer motor.
REWINDING SHAFT: Manual filling air shaft, 2 pcs of diameter 75mm
REWINDING DIA.: *1000 x 800mm
REWINDING MOTOR: 5
